+353 1 456 4099
Varem Varem ExtraVarem Pressure VesselsFeatured

Varem ExtraVarem

Drinking-water pressure vessel with potable-grade membrane — available from 2L to 1000L

Suitable for:DomesticCommercial

2-year warranty as standard, excluding consumables

Specifications

Application
Drinking water (pumps and booster sets)
Membrane
Potable-grade
Mounting
Vertical (2-1000L) or horizontal with pump stand (36-100L)
Max Pressure
8 - 10 bar (by size)
Working Temperature
Up to 93 °C (1000LV: liquids up to 50 °C)
Flange
Stainless Steel, Folded
Certification
CE Mark
Colour
White (Blue over 60L)

Vertical models

ModelCapacityMax PressurePre-chargeConnectionØ × H (mm)
2LV2L10 bar3.5 bar½"125 × 237
3LV3L10 bar2 bar1"130 × 215
5LV5L8 bar3.5 bar¾"160 × 325
8LV8L8 bar3.5 bar¾"200 × 330
12LV12L8 bar3.5 bar¾"270 × 310
18LV18L8 bar3.5 bar¾"270 × 415
24LV24L10 bar2 bar1"295 × 415
36LV36L10 bar2 bar1"350 × 415
60LV60L10 bar2 bar1"379 × 825
100LV100L10 bar2 bar1"450 × 910
200LV200L10 bar2 bar1½"554 × 1250
300LV300L10 bar2 bar1½"624 × 1370
500LV500L10 bar2 bar1½"790 × 1460
1000LV1000L9.5 bar2 bar2"945 × 1912

Horizontal models (built-in pump stand)

ModelCapacityMax PressurePre-chargeConnectionØ × L (mm)
36LH36L10 bar2 bar1"385 × 384
60LH60L10 bar2 bar1"390 × 536
100LH100L10 bar2 bar1"430 × 710

Description

The Varem ExtraVarem is a drinking-water pressure vessel for pumps and booster sets, in vertical models from 2L to 1000L and horizontal 36L, 60L and 100L models with a built-in pump stand, so the pump sits on top. It holds water under pressure, so small draws come from the vessel instead of the pump: the pump starts less often and runs for longer when it does, giving steadier pressure and a longer pump life. The water sits inside a potable-grade membrane, away from the steel. Rated to 8 or 10 bar by size (9.5 bar on the 1000LV), with a working temperature up to 93 °C on the small vessels; the 1000LV takes liquids up to 50 °C. Every vessel is pre-charged at the factory and adjustable on site at the air valve. Set the pre-charge 0.2 bar below the cut-in pressure for fixed-speed pumps, or 20% below the running pressure for variable speed pumps, and check it once a year with the pump off and the water side at zero pressure. Fit it close to the pump outlet, ideally on a brass 5-way connector, with an isolating valve so it can be serviced. For closed heating circuits, see the MaxiVarem.

Need Help Choosing?

Our technical team is here to help you select the right product for your application. Contact us for expert advice.

  • Free technical consultation
  • Competitive pricing
  • Nationwide delivery

Cookie Preferences

We use cookies to enhance your browsing experience, serve personalized content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies. Learn more