Submersible Borehole
4-inch submersible pumps for homes, farms and irrigation
Reliable water from your well or borehole. We stock Stairs 4-inch stainless steel submersible pumps with matched motors and control boxes, supplied together and ready to install, for homes, farms and irrigation across Ireland. Tell us your well depth and what it's supplying, and we'll match the full set.
6 products found
StairsStairs ST-05 Series
4" stainless steel borehole pump for deep wells with a low yield - three models, up to 173 m head
StairsStairs ST-10 Series
4" stainless steel borehole pump for household supply and farms - three models, up to 139 m head
StairsStairs ST-13 Series
4" stainless steel borehole pump for higher flow and irrigation - two models, up to 70 l/min
StairsStairs 4" Submersible Motors
4" stainless steel submersible motors for borehole pumps - 0.37 to 1.1 kW as standard, larger sizes on request
StairsStairs Control Boxes
Control boxes for single-phase 4" borehole motors - matched to each motor size
N.J. PowerSubmersible Borehole Cable
Four-core submersible cable, cut to the length of your borehole - 4 × 1.5, 4 × 2.5 and 4 × 4 mm²
Choosing a borehole pump
Choose the series by how deep the water is and how much you need:
- Stairs ST-05: for deep wells with a low yield. Up to 173 m head and 25 l/min.
- Stairs ST-10: for household supply and farms. Up to 139 m head and 50 l/min.
- Stairs ST-13: for higher flow and irrigation. Up to 106 m head and 70 l/min.
Each series has several models to match the depth. Units of 2, 3 and 5.5 HP are available on request.
Complete the system. Every borehole set needs a pump, a matched 4-inch motor and a control box, plus submersible cable cut to the length of your borehole. Add a pressure system for steady pressure and fewer pump starts: a pressure vessel (60L as standard, horizontal or vertical), pressure switch, gauge, brass 5-way connector and 1" lever valve. We supply the full set, matched to your job. See accessories.
Cloudy or gritty water? Add a filter housing on the supply into the house.
Full specs and performance curves: download the Submersible Borehole brochure (opens in a new tab) (PDF).
Frequently asked questions
What is a submersible water pump, and which type do I need?
A submersible water pump works fully underwater, pushing water up to where it's needed rather than sucking it. That makes submersible pumps quiet and efficient, and able to lift water from great depths. There are three main types, and the right one depends on the job:
- Borehole and well pumps: long, slim pumps that sit deep in a borehole and supply a home, farm or irrigation system. See our borehole pumps.
- Drainage pumps: for clean, grey or lightly dirty water, like flooded cellars, sumps and rainwater. See our drainage pumps.
- Sewage pumps: built to handle solids, for wastewater and sewage. Also on our drainage and sewage page.
Not sure which you need? Call +353 1 456 4099 and we'll point you to the right one.
What size borehole pump do I need?
It depends on how deep the water is, how high it has to be lifted, and how much water you need. We stock three Stairs ST series of 4-inch stainless steel pumps:
| Series | Best for | Max head | Max flow | Motor |
|---|---|---|---|---|
| ST-05 | Deep wells with a low yield | 173 m | 25 l/min | 0.5–1 HP |
| ST-10 | Household supply and farms | 139 m | 50 l/min | 0.75–1.5 HP |
| ST-13 | Higher flow and irrigation | 106 m | 70 l/min | 0.5–1.5 HP |
Each series has several models, so the pump can be matched to the depth. For example, the ST-05 series runs from the ST-0510 to the ST-0526. Units of 2, 3 and 5.5 HP are available on request. Tell us the well depth and what it's supplying, and we'll match the pump, motor and control box, free.
Will a 4-inch borehole pump fit my borehole?
Our 4-inch pumps and motors are built for boreholes of 4 inches and larger. Your well driller's report should show the casing size. If you don't have it, measure the inside diameter of the casing at the top of the borehole, or call us and we'll help you work it out.
What do I need for a complete borehole system?
A borehole set has three essential parts, plus an optional pressure system. We supply them together, matched and ready to install:
- A 4-inch Stairs ST pump. It's stainless steel, with a built-in non-return valve that keeps the rising main full.
- A matched 4-inch motor. It's stainless steel and factory tested. Single-phase 230 V is standard, and three-phase versions are available.
- A control box. Every single-phase motor runs through a control box matched to its size, containing the run capacitor, overload protection and an on/off switch.
- Submersible cable. Four-core cable, cut to the length of your borehole and sized to the motor (4 × 1.5, 2.5 or 4 mm²).
- A pressure system (optional). A pressure vessel, pressure switch, gauge, brass 5-way connector and 1-inch lever valve, supplied together. A 60L vessel is standard, horizontal or vertical, and other sizes are available.
How does a borehole pump system work?
The pump lifts water from the borehole into a pressure vessel, and a pressure switch turns the pump on and off. When you open a tap, water comes from the vessel first. When the pressure drops to the cut-in point, the switch starts the pump. When it reaches the cut-out point, the pump stops. Our pressure switch is factory set at 1.4–2.8 bar and can be adjusted on site between 1.4 and 4.6 bar.
Do I need a pressure vessel with a borehole pump?
In almost every case, yes. Without one, the pump would start every time someone opened a tap, even for a glass of water. Our Stairs motors are rated for a maximum of 40 starts an hour, so constant starting shortens their life. A correctly sized vessel gives you steady pressure and fewer, longer pump runs. Our borehole pressure system comes with a 60L vessel as standard, horizontal or vertical, and we supply drinking-water vessels from 2L to 1000L.
Why does my borehole pump keep switching on and off?
Rapid on-off switching (called "short cycling") is usually caused by the pressure vessel. Either it has lost its air pre-charge or its membrane has failed. Check the pre-charge first (see How do I check a pressure vessel's pre-charge?). Other causes include a leak in the system or a faulty pressure switch. Fix it quickly, because short cycling wears out the pump and motor.
My borehole water is sandy or cloudy. What can I do?
Fit a filter housing on the supply into the house to catch sand, grit and rust before they reach taps, appliances, impellers and valves. For wells and boreholes, use a 10" Jumbo housing, or a 20" Jumbo for heavy sediment, with a cotton cartridge for sand, grit and rust or a PP cartridge for finer particles. If the water is still cloudy after filtering, get it tested. See our water treatment range.
Do you install pumps?
We install domestic booster pumps and commercial booster sets across Dublin city and county. Borehole pumps, drainage and sewage pumps, and water treatment systems are supplied for your installer to fit. We match every part to the job, and we're happy to talk your plumber or installer through the setup. Outside Dublin, we deliver nationwide (next working day on in-stock items).
Can you repair my pump?
Yes, for the brands we sell. We repair and test Walrus, EBARA, Stairs and PowerBox pumps at our workshop in Ballymount, Dublin 12, often within the same working day. Bring the pump in, or contact us to arrange it. See our services.
More questions? See all pump FAQs.
Need help choosing? Call +353 1 456 4099 or get a quote. Our products come with a 2-year warranty as standard, and trade accounts are available for plumbers and contractors.